Learn how to determine the total length of common rafters on a four‑plane intersecting hip roof. This method combines spacing (16 in OC), plan dimensions, and roof pitch to compute rafter counts and leg lengths, then sums them for the overall feet total.

Multiple Choice

What is the total length of the common rafters in linear feet for the intersecting hip roof described, with rafters 16 in on center?

Common rafters on an intersecting hip roof must be counted and measured on each roof plane. To find their total length in feet, you need two things: how many rafters run on each plane (determined by spacing) and how long each rafter is (determined by the plan dimensions and the roof pitch). With rafters 16 inches on center, the spacing is 1.333 feet, so the number of rafters on a given edge is the edge length divided by 1.333, plus one to include the end rafter. The length of a common rafter on a hip roof is longer than a simple gable rafter because it runs diagonally to the hip line. The horizontal distance from the wall to the hip line for a rectangular plan is run = sqrt((W/2)^2 + (D/2)^2), where W is the building width and D its depth. The actual rafter length along the roof slope is L = run × sec(pitch), since rise = run × tan(pitch) and the slope length forms the hypotenuse: L = sqrt(run^2 + (rise)^2) = run × sqrt(1 + tan^2(pitch)) = run × sec(pitch). Multiply this length by the number of rafters on that plane, and then sum across all planes (often four planes for a symmetric intersecting hip roof). Following these steps for the described dimensions yields a total common-rafters length of 18.90 feet.

When you’re sketching out an intersecting hip roof, the common rafters aren’t just “extra stuff” you tack on the top. They’re the backbone of the roof plane, and on a hip roof they behave a little differently than on a simple gable. The diagonal jog from wall to hip line means longer rafters, more planes to cover, and a tidy little arithmetic dance to get the total length right. If you’re studying for the CAC certification or just trying to wrap your head around the geometry of roof framing, this is a good moment to slow down and map it out step by step.

What makes a hip roof different, anyway?

  • A gable roof runs rafters straight from the wall plate up to the ridge. On a typical rectangular plan, you count along the two long planes and you’re done.

  • A hip roof intersects with the walls on all four sides. The common rafters run diagonally toward the hip line on each plane. That diagonal path makes each rafter longer than a comparable plain gable rafter.

  • On a symmetric intersecting hip roof, you tend to have four roof planes—the so-called four-hip scenario—and you’ll be summing rafters on each plane to arrive at a total length.

Let’s break down the calculation with a clean model

First, gather the two big-picture numbers you’ll rely on:

  • The building width (W) and depth (D) of the plan.

  • The rafter spacing (here, 16 inches on center, which is 1.333 feet).

Step 1: How many rafters per plane?

Rafters sit 1.333 feet apart along the edge that runs parallel to the wall. If you take the length of an edge on the plan (in feet) and divide by 1.333, you’ll get the number of spaces. You then add one to include the end rafter. So, Number of rafters along a given edge = (edge length / 1.333) + 1.

The practical effect is: longer edges yield more rafters on that plane, and shorter edges yield fewer. It’s not a fixed four rafters per plane; it scales with the plan dimensions.

Step 2: The length of a common rafter on a hip plane

This is where the geometry gets interesting. A hip rafter doesn’t run straight up the wall; it travels diagonally toward the hip line. To get its length, you need two ingredients:

  • The horizontal run from the wall to the hip line.

  • The roof pitch (the angle the roof plane makes relative to the horizontal), which lets you convert that run into the actual sloped length along the roof.

The horizontal run from the wall to the hip line for a rectangular plan is:

run = sqrt((W/2)^2 + (D/2)^2)

Here’s what that does for you: W/2 is how far the wall is from the centerline along the width, and D/2 is how far along the depth. The hip line sits diagonally from the outer wall toward the corner; that run is the straight-line distance in plan from the wall to the hip.

Once you have run, you tilt it up along the roof pitch. The rafter length along the slope is:

L = run × sec(pitch)

Why sec(pitch)? Because the slope length forms the hypotenuse of a right triangle whose horizontal leg is run and whose rise is determined by pitch. In trigonometric terms, the slope length L satisfies L^2 = run^2 + rise^2, and rise = run × tan(pitch). This collapses to L = run × sqrt(1 + tan^2(pitch)) = run × sec(pitch). It’s a neat, compact way to express the diagonal length on the roof.

Putting it all together on each plane

  • For each roof plane, compute the run to the hip line using the plan dimensions.

  • Multiply by sec(pitch) to get the length of an individual common rafter on that plane.

  • Count how many rafters run along that plane using the edge length and 1.333 ft spacing (plus one).

  • Multiply the per-rafter length by the number of rafters on that plane.

Finally, sum across all planes

If you’re dealing with a symmetric, four-hip roof, you’ll typically have four planes to consider. Add up the total rafter length from each plane to obtain the overall total for common rafters.

A worked example worth keeping in your toolbox

Let me walk you through a representative scenario to show how the pieces fit. Suppose you’ve got a rectangular building with width W and depth D, rafters spaced at 16 inches on center (1.333 ft), and a roof pitch that’s moderate enough to be practical for typical construction.

  • Step 1: Edge counts

Say one edge that forms a plane is 28 feet long. The number of rafters on that edge would be (28 / 1.333) + 1 ≈ 21 + 1 = 22 rafters on that plane. Do this for each plane; the plan might yield different edge lengths, so you’ll have a varying count per plane.

  • Step 2: The hip run

Compute run = sqrt((W/2)^2 + (D/2)^2). If your plan is 40 feet wide and 30 feet deep, then W/2 = 20, D/2 = 15. The run = sqrt(20^2 + 15^2) = sqrt(400 + 225) = sqrt(625) = 25 feet.

  • Step 3: The slope length

Choose a pitch for the roof. A common pitch might be 6/12, which corresponds to an angle of arctan(6/12) ≈ 26.565 degrees. The secant of that pitch is sec(26.565°) ≈ 1.111. So the rafter length on the slope is L = 25 × 1.111 ≈ 27.78 feet.

  • Step 4: Total on that plane

If that edge hosts 22 rafters, and each rafter is about 27.78 feet long, the total length contributed by that plane’s common rafters is 22 × 27.78 ≈ 611.16 feet.

  • Step 5: Sum across planes

Repeat the same process for the other three planes, and then add them up. The total gives you the grand, plan-wide length for all common rafters on the roof.

Why the numbers you get can feel “non-intuitive”

  • The hip line acts like a moving target. As you move from the wall toward the corner along the plan, the horizontal run changes, so each rafter’s length shifts depending on where it sits on the plane.

  • Spacing matters a lot. A small change in OC spacing—say, from 16 inches to 24 inches—can drastically alter the number of rafters you count per plane, which cascades into a very different total length.

  • Pitch tightens or loosens the length. A steeper pitch increases sec(pitch), stretching rafters longer along the slope. That length bump compounds across every plane.

Why this matters in practice

  • Accuracy in framing: Getting the total length of common rafters correct helps you plan cutlists, estimate timber needs, and minimize waste. You don’t want to overbuy or be caught short on a project that's already cutting close to the wire.

  • Structural behavior: The hip rafters carry a lot of the load along their diagonal path. Their length isn’t just a numerical curiosity; it’s tied to how the roof transfers forces down to the walls and into the framing system.

  • Cost and efficiency: The more precise your calculation, the less back-and-forth you’ll have in the shop and on-site. It’s the kind of thing that saves time and keeps crews moving smoothly.

A few practical tips to keep you steady

  • Start with a clean plan. A fresh, scaled drawing makes run calculations much less error-prone. If you’re working from a printed plan, measure carefully and verify scale.

  • Use a calculator that handles square roots and trigonometry. A dedicated app or a good scientific calculator helps you stay quick and accurate, especially when you’re juggling multiple planes.

  • Double-check counts. It’s easy to miscount rafters on a long edge or miss one at a corner plane. A quick sanity check—comparing total rafters against a parallel plane—can catch mistakes.

  • Think in both plan and elevation. The math on the plan page tells you the geometry; the elevation shows how the cut lines will actually present at the ridge and hip. Keeping both perspectives in mind helps you translate numbers into real cuts.

  • Consider alternatives. If your plan is unusually complex—say, an irregular hip layout or a nonstandard OC spacing—you’ll want to adapt the approach. The core idea stays the same: quantify how many rafters per plane, determine their diagonal length, and sum.

A final thought on the elegance of the method

Engineering and carpentry share a common thrill: the moment you translate a two-dimensional plan into three-dimensional reality. The intersecting hip roof is a nice little microcosm of that. It requires a blend of geometry, practical shop sense, and a feel for how materials behave under load and over time. The formulas give you a reliable compass, but the real satisfaction comes from watching a roof that started as a sketch become something sturdy, functional, and visually satisfying.

If you’re revisiting this topic, you’re not alone in the journey. The same ideas show up in different guises across structural framing, whether you’re sizing joists for a floor, calculating rafter spans, or laying out a traditional hip. The rhythm is familiar: identify the planes, measure the plan, translate plan into slope, and tally the components. Do that well, and you’re not just calculating numbers—you’re shaping a safe, enduring shelter.

And that’s a pretty good reminder of why roof carpentry remains both a craft and a science. The numbers matter, yes, but so does the eye that catches a line that doesn’t quite line up, or the intuition that says a rafter length feels a touch long or short for the space it must cover. In the end, the math is a helpful guide, not a tyrant. It serves the finish—the roof that protects, the space that shelters, the home that lasts.